oil injector long squar type

SL-11 Series

high-output Injector from LINCOLN

Features

For single-line,high-pressure central lubrication system
For dispensing lubricants compatible with flouroelastomer packing and viscosity up to NLGI No.2 (refer to Design Guide).
Output is externally adjustable
Indicator stem permits visual check of injector operation
May be combined in a circuit of injectors SL-32,SL-33,SL-V,SL-V XL and/or SL_1.
Available only as single unit with 1/2' NPTF Female inlet.
Carbon steel injectors with flouroelastomer packings

oil injector high-output

Specifications:

Series	Output		Operating Pressure
Series	Min.	Max.	Min.	Max.	Typical	Vent
SL-11	.050 cu. in. .82 cc	500 cu. in. 8.2 cc	1000 psig 69 bar	3500 psig 241 bar	2500 psig 172 bar	800 psig 55 bar
Order Model: 85497 Carbon steel injector Number of Outlets:1 Connections inlet: 1/2 in. NPTF(F) Connectionsoutlet: 1/4in. NPTF(F)
Note: 1.Injectors have flouroelastomer packings. Check compatibility with synthetic lubricants. 2.Injectors rated for 350°F (176°C)max. ambient temperature, depending on lubricant used. 3.Injectors supplied with fitting for filling feed line via alternate outlet port. 4.Output with adjustment screw hand-tightened is .05 cu. in. Maximum output is achieved with 11 1/2 turns at .040 cu. in./ turn.